產品中心 應用方案 技術文摘質量保證產品選型 下載中心業內動態 選型幫助 品牌介紹 產品一覽 聯系我們
- FN2317手剎力傳感器中英文產品介紹
- 來源：賽斯維傳感器網 發表于 2014/6/17
Applications: On-board equipment testing, Production quality control, Laboratory and research
Industries: Engine and Vehicle
Description: The FN2317 is designed with the express purpose of allowing quick and easy installation when measuring forces applied to the handle of the hand brake in automobiles. Through careful placement of metallic strain gauges inside the sensors, accurate measurements are obtained regardless of the point of application of force. Clamping collars facilitate the prompt and uncomplicated installation of the load cell under the hand brake. As such, the FN 2317 is compatible with most models of hand brakes. Measurement Specialties, Inc. have many years of experience as a designer and manufacturer of sensing solutions to the automotive industry and can supply standard or custom sensors for specific uses and testing environments. Other designs (e.g. FN2317-3 with a connector output) have been created. Consult your MEAS’ representative for any information or a custom solution to your application.
Features:
Tension measurements
High accuracy ≤±0.5% F.S.
Compact, rugged and easy to mount design
Optional high level output
典型應用: 車載設備測試，生產質量控制，實驗室和研究
行業: 發動機和機動車輛
產品描述:
FN2317的主要用途是在快速簡便安裝的前提下進行手剎把手力的測量。傳感器內位置精準的金屬應變片確保產品的精度不受測力點的影響�？ú圯o助用戶迅速簡便的將傳感器安裝于手剎下方。而且，FN2317幾乎與所有的手剎型號兼容。同系列產品還包括連接器輸出（FN2317-3）等型號，請與我們聯系獲取更多信息和定制解決方案。作為擁有多年經驗的傳感器設計和制造商，MEAS常常與客戶合作，按要求定制適合特殊用途和測試環境的傳感器。
特點:
拉力測量
高精度：≤±0.5% F.S.
堅固耐用，結構緊湊，方便安裝
可選放大輸出
FN2317力傳感器更多技術參數及規格書下載請瀏覽：http://yyjsjy.net/sensors/597.html
北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。
- 如果本文收錄的圖片文字侵犯了您的權益，請及時與我們聯系，我們將在24內核實刪除，謝謝！
