產品中心 應用方案 技術文摘質量保證產品選型 下載中心業內動態 選型幫助 品牌介紹 產品一覽 聯系我們
- MLS位置傳感器中英文產品介紹
- 來源：賽斯維傳感器網 發表于 2014/6/20
Applications: Linear displacement, movements, velocites in dirty enviroments, very precise angular measurement using pole wheels
Industries: Engine and Vehicle, General Industry
Description: Sliding the MLS-Sensors along a magnetic scale will produce a sine and a cosine output signal as a function of the position. In order to deliver satisfying results, this will be achieved as long as the air gap between sensor edge and magnetic scale surface does not exceed approximately half of the pole pitch. As the sensor principle is based on the anisotropic magneto resistance effect, the signal amplitudes are nearly independent on the magnetic field strength and therefore air gap variations do not have a strong effect on the accuracy. The sensor detects a magnetic gradient field and is thus almost insensitive to homogenous magnetic stray fields.
Features:
Sin- / Cos-output signals suitable for signal evaluation by standard-ASIC’s
Very high precision
Insensitive to air gap fluctuations
Highly reliable
Low interference field sensitivity
典型應用: 線性位移和速率測量，用磁極輪做角度測量
行業: 發動機和機動車輛, 工業控制
產品描述:
MLS傳感器沿著磁尺移動將產生一個正弦和余弦信號。為了得到滿意的結果，傳感器邊沿與磁尺表面的間隙不能超過半個磁極距。由于傳感器是基于各向異性磁阻效應，信號幅度是獨立于磁場強度的，因此間隙的不同不會影響測量精度。傳感器檢測磁場梯度，所以對均勻雜散磁場幾乎不敏感。
特點:
正弦/余弦輸出適合標準ASIC信號評估
高精度
對空隙變化不敏感
高可靠性
對干擾場不敏感
MLS傳感器更多技術參數及規格書下載請瀏覽：http://yyjsjy.net/sensors/53.html
北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。
- 如果本文收錄的圖片文字侵犯了您的權益，請及時與我們聯系，我們將在24內核實刪除，謝謝！
